Store > V60 Guide

Hario V60 Coffee Brew Guide

"The Hario V60 is a sleek, simple pourover brewer. We love it because it emphasizes flavor clarity and brightness over mouthfeel."

Step One

Bring 1 liter (33.8 ounces) of filtered water to boil in a gooseneck spouted kettle. Place the V60-02 brewer on a carafe or large mug. Open the V60-02 bleached paper filter, folding along the crease and place in the brewer so it stays open.

Step Two

Then, rinse the paper filter with a few ounces of the hot water from your kettle. This step will rinse out any extra paper taste from the filter, preheat the brewer, and create a seal between the paper filter and the brewer. Dump the rinse water and place the brewer back on the carafe.

Step Three

Weigh out 26 grams of freshly roasted, whole bean coffee on a scale. If you don’t have a scale, you can also measure this with a tablespoon. We recommend about 4 level tablespoons. (1 Tablespoon ≈ 6 grams)

Step Four

Using a burr grinder, grind the coffee to a medium-fine consistency. Brewing with a consistent and uniform grind size is crucial to brewing delicious coffee. If you aren’t sure what setting to use, check out our grinding page in our Learn section for reference.

Step Five

Place the V60 and carafe on the scale, add the ground coffee to the filter and shake the brewer to level the grounds, and tare to 0. Then, using a spoon, create a small divot in the center of the grounds. This step will allow the brew water to penetrate the entire bed of grounds, making sure all the grounds are evenly saturated and ready to brew.

Step Six

After starting your timer, “bloom” the grounds by pouring 50 grams (2oz, or just enough to cover the coffee) of the filtered water just off boil and let it sit for 30 seconds. This step allows the grounds to saturate with water, forcing out gases and priming the coffee for the brewing process.

Step Seven

Slowly pour the remaining 350 grams (12 oz) water in circular pattern, staying away from the edges. Aim to finish pouring around 2:00. Then using a spoon, gently stir four times in a clockwise motion. This final stir will help pull away any grounds stuck to the filter wall and will help speed up the drawdown.

Step Eight

If poured and stirred correctly, the grounds should appear to have a mild dome shape, and finish draining between 2:30 and 3:00. Note: If it takes less than 2:30 to finish draining, use a finer grind and try pouring slower. If it takes longer than 3:00 to drain, use a coarser grind to allow the water to pass through the coffee more easily.

Step Nine

Remove the V60 and discard filter in the trash or compost.

Step Ten

Swirl the coffee in the carafe and smell the delicious aroma wafting throughout your kitchen. Grab your favorite mug and savor every sip.

Get the Gear

Baratza Burr Grinder
100 filters for your Hario dripper, pour over coffee has never been so easy. One of our favorite brewers, this is a quick, clean, and easy way to brew a bright, clean cup. The standard all purpose kettle, 1000W electric base is optimal for heating water to temperature quickly, stainless steel walls keeping it hot during brewing, and gooseneck spout makes it great for pour over brewing. Great entry grinder, perfect for brewing manual or auto drip at home.